Specials & New

Solid Brass Hex Metric Bars For Machining - 10pc Pack 6-16mm - 2pcs each   Each pack contains 10pcs. Made from quality materials, solid brass, each bar is 300mm long. We also stock brass in Round & Square. As well as bright mild silver steel,...

Solid Single Brass Hex Bar For Machining - 16mm - 25mm OD Made from quality materials, solid brass, each bar is precut to 300mm long We also stock bright mild silver steel, solid silver steel & stainless steel rods.    Listing...

Solid Single Brass Square For Machining 20mm - 25mm - 30mm OD Made from quality materials, solid brass, each rod is 300mm long (60mm is only 250mm). We also stock bright mild silver steel, solid silver steel & stainless steel rods...

Solid Brass Square Metric Bars For Machining - 10pc Pack 6-16mm - 2pcs each   Each pack contains 10pcs. Made from quality materials, solid brass, each bar is 300mm long. We also stock brass in Round & Hex. As well as bright mild silver steel,...

Brazed On Carbide Turning Tools   Carbide is pure and solid form that can be re-sharpened   These little guys will need to be shaped by you to fit your purpose.    High grade M20 can be reformed with Green Silicon Carbide...

20PC Cycle Tap and Die Set HSS 26TPI - 60 degree thread angle   Sizes include: 1/4, 5/16, 3/8, 7/16 & 1/2"   EACH SIZE YOU GET A STARTER, INTER & BOTTOM TAP PLUS A 1"OD DIE TO SUIT 15 TAPS AND 5 DIES IN...

12pc BSP TAP & HEX DIE SET 1/4" - 1" BOXED APRICA SET   SIZES INCLUDED INCLUDED IN THIS SET: 1/4", 3/8", 1/2", 5/8", 3/4" & 1"   All 6 Taps are Starter Lead    These Boxed sets are made up for us. You will not be...

BRASS REDUCERS Sizes: 1/8" BSP TO 1/4" BSP 1/4" BSP TO 3/8" BSP 3/8" BSP TO 1/2" BSP 1/2" BSP TO 3/4" BSP   Features Suitable for water application used in general, irrigation and rural services, compressed air pipes and fuel and gas lines...

BRASS Adaptors Convert your BSP Thread to an NPT Thread! Sizes Available 1/8 BSP FEMALE TO 1/8 NPT MALE 1/4 BSP FEMALE TO 1/4 NPT MALE3/8 BSP FEMALE TO 3/8 NPT MALEThese adaptors have been machined from solid Brass     

12pc BSPT TAP & HEX DIE SET 1/8" - 1" BOXED APRICA SET   SIZES INCLUDED INCLUDED IN THIS SET: 1/8", 1/4", 3/8", 1/2", 3/4" & 1"   All 6 Taps are Starter Lead    These Boxed sets are made up for us. You will not be...

3/16" x 24tpi Tap Set HSS This Tap set is unbranded - Chinese Ex-stock we used to sell the same Tap Sets for $39.95 They are not rubbish, these are our old line for BSW Taps in HSS. We've sold many of these back before we developed our very own...

 Button Die Holder Set [4pc Bar Type] - Includes 13/16" to 2" THIS SET COVERS ALL THE STANDARD SIZE BUTTON DIES WE USE HERE IN AUSTRALIA   COVERED IN THIS SET: 13/16" - 165mm Approx Length 1" - 220mm Approx Length 1.1/2" - 310mm...