Lathe Tooling

3MT Long Series Lathe Test Alignment Bar - New Product!    HARDENED AND GROUND PRECISION TEST BAR. 325mm Overall length with 240mm Parallel Bar Ground Centres 25MM OD   Re - align your tail stock easily with this test bar...

   POST FREE LPR TOOLMAKERS DESIGNED THREAD CUTTING BARS 3 OF 10MM RRP $80.00 SHANK SIZE 11mm Includes 1 mounted ER12 60dec Insert   12MM RRP $85.00 SHANK SIZE 12mm Includes 1 mounted ER12 60dec Insert   16MM RRP $90...

CHUCK ALIGNER - MT2   The 4 Jaw Chuck Centralism works by being trapped between the lathe tailstock centre and a centre punched mark on the work piece held in a 4 jaw chuck or on a faceplate.   A Dial indicator placed against the...

4 Jaw Lathe Chuck - Plain Back - Independent 80mm - 100mm - 125mm - 200mm Sizes available   Suits metal lathes & small rotary tables. INDEPENDENT 4 JAW CHUCK  Plain back, new and ready to be mounted. Please note: These aren't wood...

 4 Jaw Self Centering Chucks These chucks are suitable for lathes, milling machines and grinding machines. These chucks are of high quality and will supremely assist you cutting operations in the workshop! Select your size up above   We...

ROTARY TABLE | 4"- 100mm | 36-1 ratio Comes With Mounted 100mm 3 Jaw Chuck Product shipped set up and ready to go - Usable straight away   Precision made 4" rotary table, can be used horizontal or in vertical mode, ideal must have tool for the...

   4MT - HARDENED AND GROUND PRECISION TEST BAR.Re-align your tail stock easily with this test bar.   HARDENED AND GROUND PRECISION TEST BAR   High precision within .0002” max run-out.   The ideal tool for...

4MT Spindle Lathe Test Alignment Bar    HARDENED AND GROUND PRECISION TEST BAR.   Heavy Duty - Comes supplied with inspection cert in a neat little wooden carry case 400mm Overall length with approx 270mm Parallel Bar Ground...

 4Pc Lathe Carrier Set (Bent Type)     Cast from Malleable Steel.Have High Tensile Strength. Provided with Square Head Screws.   Bent lathe dogs are used in metalworking to hold irregularly shaped workpieces or...

   4PC Lathe Carrier Set (Straight)        Cast from Malleable Steel. Have High Tensile Strength. Available in both Straight and Bent styles. Provided with Square Head Screws. Capacity Size you get in this...

  PIN VICE SET   4 different sizes in set Ideal for holding small tools, rod, wire, taps etc.Collets grip firmly when screw chuck is tightened.Heavy knurled body.Black shiny finish. clamping range  0 - 4.8mm

5/16" LATHE TURNING TOOL HOLDER Holder Shank Size: 1/2" x 1-1/8" x 7"   Shanks available in: Left bent towards the Tailstock Right bent towards the Chuck Straight   You pick which angle you require in the drop down menu. Also...