Tool Holders & Inserts

Indexable Carbide Tipped Profiling Holder 16mm Shank 100mm in length   Perfect for deep profiling For putting a radius on your job Used for turning Screw and key are included RCMT-090 Inserts are American made (1) is included with the...

Indexable Carbide Tipped Profiling Holder 20mm Shank 125mm in length   Perfect for deep profiling For putting a radius on your job Used for turning Screw and key are included RCMT-090 Inserts are American made 8mm OD Carbide...

Aprica Double Ended Lathe Tool Holders Use your holder Left or Right   10-16mm  Double Ended Insert Tool Holder [Left-Right] 10mm x 73mm long (7.40mm Centre Height) - Takes TCMT204 Inserts  12mm x 98mm long (7.90mm Centre...

Double Ended Insert Tool Holders - Short Series   Short Series in 10mm, 12mm & 16mm size options. 10mm x 65mm long 12mm x 68mm long 16mm x 80mm long   2 Inserts included with each holder.  APRICA BRAND. Tool...

Aprica LPR Toolmakers Range of Insert Turning Toolholders for lathes TAKES TCMT-204 ISO STANDARD INSERTS   Sizes Include: 3/8" (10mm) - (2.1/2" long) 1/2" (12mm) - (3.1/2" long) 5/8" (16mm) - (4" long)    Simply select the size...

LONG SERIES - Double Ended Insert Tool Holders - Right & Centre Cut   10mm x 70mm long (Takes TPMT-21.51 Insert) 12mm x 80mm long (Takes TPMT-21.51 Insert) 16mm x 110mm long (Takes TPMT-32.51 Insert) 20mm x 115mm long (Takes...

1/2" PARTING TOOLHOLDER  Includes free Cut off Blade *suit  5/8" Tool Centre Height Machined to Precise Tolerances. Carefully Heat Treated. Support the Blade Over a wide area, reducing chance of Blade breakage. Provided with One...

  LPR TOOLMAKERS PARTING TOOL SYSTEMS BEST QUALITY BLADES + TIPS PACKAGE DEAL Complete with 2 x Blades + 10 USA made Inserts + Plus your Parting Block of choice (The smaller Block kits will come in a foam padded sealed carry case) ISO 9001...

SCMT-1204 Carbide Inserts   To suit our Indexable Countersinks listed HERE   Option between standard grey insert or titanium coated insert. American made! Sold individually or you can purchase our Pack Savers.

 GROUND SILVER  STEEL STOCK   READY TO BE MACHINED CAN BE HARDENED up to 64RC  Manganese & Chromium Carbon & Iron     Sizes included in this deal:  6 mm - 8mm - 10mm -12mm - 16mm - 20mm ...

 TPG-322 C5 Titanium Coated Milling Inserts  Special grade and coated with Titanium. After this it undergoes a special treatment to reduce the roughness on the coating. These insert are used on our 50MM, 63MM & 80MM Milling/Face...

TPMT 21.51 & 32.51 Carbide Inserts (American Made)   TPMT 21.51 Inserts - To suit our newly Designed 10mm double ended tool holders TPMT 32.51 Inserts - To suit our newly Designed 12mm, 16mm & 19mm double ended tool holders CLICK...