Reverse Letter & Figure Metal Stamp Sets - Standard Quality from 3/32" - 1/4"

High quality stamps with excellent clarity.

Available in:

3/32" (2.3mm)

1/8" (3mm)

5/32" (4mm)

3/16" (5mm)

1/4" (6mm)

100s of sets sold WORLDWIDE.

Ideal for steel, copper, brass and other NON HARDENED material. 
Clear and precise impression is formed for many years.
Suits model makers, toolroom and jewelry makers.

How to get the best results without a holder:

Using letter and number stamps without a holder can be challenging, but it is still possible with a little practice and patience. Here are some tips on how to use letter and number stamps without a holder:

1. Use a flat and stable surface: Make sure to use a flat and stable surface, such as a workbench or table, to place your stamps on.

2. Hold the stamp steady: Hold the stamp steady with your non-dominant hand to prevent it from slipping or moving while you strike it with the hammer.

3. Strike the stamp evenly: Use a hammer to strike the stamp evenly and firmly. Make sure to apply enough pressure to create a clear impression without hitting it too hard and causing the stamp to shift.

4. Use a straight edge: To keep your letters or numbers aligned, you can use a straight edge or ruler as a guide to keep your stamps in line.

5. Practice on scrap materials: Practice on scrap materials before stamping on your final project to get a feel for how much pressure you need to apply and to ensure that your stamps are lined up correctly.

Remember, using letter and number stamps without a holder requires precision and patience, so take your time and practice to get the best results.

Note: All stamps when stamping will imprint the height of the specific set you purchase. So for example if you order 3mm - These stamps will imprint 3mm high letters and figures. Do not measure the outline of the stamp as it will give you a false reading as to what the stamps will actually imprint. Always run a test print before applying to your work.