Quick Change Toolposts

3pc MINI QUICK CHANGE TOOLPOST          Suitable for unimats & small variable speed lathes up to 400B/C Fully hardened & ground mounting blocks & standard holders. 3Pc Toolpost Set 2 x...

 LPR Toolmakers range of spare toolpost holders to suit our kits.   If you have an existing unit we kindly ask you to check the critical dimensions to see if our holders will suit before purchasing.   T37 MODEL - FULL KIT...

QUICK CHANGE TOOL POST SYSTEM SPARE HOLDERS PLEASE NOTE THIS IS A BASIC STARTER SYSTEM. YOU CAN BUY MORE HOLDERS TO SUIT THIS SYSTEM TO EXPAND YOUR RANGE.   Suits lathes up from 36" to 48" between centers. HOLDERS: 95x40x50mm HIGH The main...

5pc QUICK CHANGE TOOL POST SYSTEM   T2 MODEL PACKED WEIGHT IS 12KG - SENT VIA AUSTRALIA POST W/ SIGNATURE   WILL THIS FIT MY LATHE? The easiest wat is to measure your 4 way Tool post block from the top to bottom. If the height...

5pc QUICK CHANGE TOOL POST SYSTEM   T3 MODEL   WILL THIS FIT MY LATHE? The easiest wat is to measure your 4 way Tool post block from the top to bottom. If the height is within 10mm either side of 95mm (This Blocks height) then...

QUICK CHANGE TOOL POST SYSTEM 37MM MODEL Will suit -  MYFORD, SOUTHBEND, HERCUS & smaller lathes up to 24" 600MM between centre block height.    Centre spigot hole: 1/2" CAN BE BUSHED OR OPENED UP TO SUIT YOUR EXISTING...

QUICK CHANGE TOOLPOST SYSTEM -  Medium 51MM Main holder is 51mm high & 16mm bore in middle which can be altered to suit your machine either by bush or opening spigot bore.   Includes: Tool Post Block T51 (51mm High) which will suit...