THREADING & TAPPING ATTACHMENT FOR LATHES

AVAILABLE IN LIMITED QTY 2-3-4MT UNTIL SOLD OUT

• Please note - This units Die Holders allow you a smaller threading OD (10.25mm) then our stock standard kits (16.25mm).
• Also with the 1.1/2" OD die holder you're limited to just 13mm approx depth of cut - hence the massive reductuion in price - we're clearing them out at a Christmas Special. Still highly usable, just not ideal. 
• 13/16" - 36mm Max Threading Depth (10mm or 3/8" Max threading OD'' to reach Max Depth)
• 1" - 38mm Max Threading Depth (10mm or 3/8" Max threading OD'' to reach Max Depth)
• 1.1/2" - 13mm Max Threading Depth (10mm or 3/8" Max threading OD'' to reach Max Depth which highly unlikely unless you have 1.1/2"OD dies that are for threads under 100mm or 3/8")

• Made of High Quality Tool Steel , this is a high quality product for your lathe machine
• Used for threading and tapping purpose on the lathe machine
• Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2"
• Comes in precisely ground MT2 ,MT3 and MT4 Shank, that goes inside your lathe tailstock & intended job for threading & tapping .
• The Die for threading purpose is hold in the various Die holder sizes as above.
• The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the rotating job in the lathe's chuck.
• suit threading up to 16mm [5/8"]  suit Tapping up to  12mm [1/2"] with Holders provided
• Great all in one must Tool for the lathe.

MADE from M2 HSS to ISO standards