APRICA BRAND

PLEASE NOTE WE GET THESE DONE IN EITHER ALUMINIUM OR WOODEN CASES

SO YOU WILL RECIEVE WHATEVER WE HAVE CURRENTLY IN STOCK AS THESE ARE FAST SELLERS.

These sets are safely packed in a carry case with foamed interior to help protect your tools. 

We  stock 4 different sizes in imperial:

 1/4" - 5/16" - 3/8" - 1/2"

 Select your size from the options above

        Each Set includes:

1. Right Hand Turning Tool: This cutting tool is used for turning the outside diameter of a workpiece in a clockwise direction. It has a cutting edge that is ground to an angle that is suitable for taking light to medium cuts on a variety of materials.

2. Left Hand Turning Tool: Similar to the right-hand turning tool, the left-hand turning tool is used for turning the outside diameter of a workpiece but in a counterclockwise direction. It is designed for use on materials that have a tendency to work-harden or produce long chips.

3. Straight Cut Turning Tool: This tool is used for facing, turning, or profiling operations on a workpiece. It has a square or rectangular cross-section, with a cutting edge that is perpendicular to the tool's shank.

4. Corner Right Angle Tool: This cutting tool is used for squaring off the corners of a workpiece or making cuts at right angles. It has a cutting edge that is ground to a 90-degree angle.

5. Boring Bar: This tool is used for creating a hole that is accurately sized and has a good surface finish. It is designed to be inserted into an existing hole and rotated to remove material and enlarge the hole.

6. Internal Boring Bar Blind Holes: Similar to a boring bar, an internal boring bar for blind holes is designed for creating holes that are not through-holes. It has a cutting edge that is angled to allow it to remove material from the bottom of the hole.

7. Grooving Tool: This tool is used for creating narrow grooves or slots in a workpiece. It has a cutting edge that is ground to a specific width, allowing it to create grooves of various sizes.

8. 60-Degree Thread Cutting Tool: This cutting tool is used for creating 55 to 60-degree threads on a workpiece. It has a cutting edge that is ground to a specific angle and is designed to cut into the material as the tool is rotated.