Internal Grooving Bars with Carbide Inserts [12 & 16mm Shank]

Internal Grooving Bars with Carbide Inserts [12 & 16mm Shank]

Each Holder has a machined flat on them & comes with 1 x 1mm Carbide Insert

Internal Grooving Tool KGK7ROO12H075 - 12mm Shank 

Grooving from ø7mm minimum bore diameter SHANK 12mm

Machined flat for easy holding , has a 3.4mm coolant Hold thru with spay outlet on shoulder of Insert

The nose where the Insert is mounted is 20mm long total Length of Bar is 100mm

Internal Grooving Tool KGK7ROO16H075 - 16mm Shank 

Grooving from ø7mm minimum bore diameter SHANK 16mm

Machined flat for easy holding , has a 3.9mm coolant Hold thru with spay outlet on shoulder of Insert

The nose where the Insert is mounted is 20mm long total Length of Bar is 125mm

These Precision Boring Bars are ideal for small work placing circlip Grooves internally.

ISO Standard Parting & Grooving P&M Carbide Inserts

Used in turning applications to cut grooves, circlips, form slots, or part off material from a workpiece. The recommended cutting speeds for these inserts depend on several factors including the material being machined. These are P&M Grade Carbide Inserts - recommended cutting speeds can be found in the images for this listing.

We sell spare 1mm, 1.2mm, 1.25mm & 1.5mm Inserts singularly if required. 

INSERT PART NUMBERS: 

1MM - GK7R100-L1.5 

1.2MM - GK7R120-L1.5 

1.25MM - GK7R125-L1.5 

1.5MM - GK7R150-L1.5