null

Workshop visits welcome, by appointment only. Please phone to arrange a visit time.

Gear Cutter Arbors Straight Shank, Morse Taper or 30, 40INT or R8

SKU:
GRCUARB-01
Availability:
If in stock (Please see below price for current stock level) - Ships same day if ordered between Monday-Friday & before 3.30PM Victorian time.
Shipping:
Calculated at Checkout
  • Gear Cutter Arbors Straight Shank, Morse Taper or 30, 40INT or R8
  • Gear Cutter Arbors Straight Shank, Morse Taper or 30, 40INT or R8
  • Gear Cutter Arbors Straight Shank, Morse Taper or 30, 40INT or R8
  • Gear Cutter Arbors Straight Shank, Morse Taper or 30, 40INT or R8
  • Gear Cutter Arbors Straight Shank, Morse Taper or 30, 40INT or R8
  • Gear Cutter Arbors Straight Shank, Morse Taper or 30, 40INT or R8
$78.95

Description

APRICA GEAR CUTTER ARBORS AVAILABLE IN THE FOLLOWING

 Please note Cutters in pictures are not included they can be purchased in our store.

 

 

To suit gear cutter, slitting saws, side & face cutters.

METRIC & IMPERIAL BORES - READ OPTIONS BELOW

  Made from hardened & tempered tool steel.

  These arbors can be used directly out of your lathe or milling machine.

Straight holders should be used in a collet chuck or side lock holder.

 NOTE: All 3MT HOLDERS HAVE A 12MM X 1.75 DRAWBAR BACK

 

Arbors to select from: 

  • 13mm straight shank - Takes 12mm bore Cutters (4 spacers, 3mm key, 100mm long)
  • 20mm straight shank - Takes 16mm bore Cutters (4 spacers, 3mm key 105mm long
  • 20mm straight shank - Takes 22mm bore Cutters (4 spacers, 5mm key 110mm long
  • 3MT shank - Takes 16mm bore Cutters (4 spacers, 3mm key, 200mm long)  12MM X 1.75 DRAWBAR BACK
  • 3MT shank - Takes 22mm bore Cutters (4 spacers, 5mm key, 200mm long)  12MM X 1.75 DRAWBAR BACK
  • 3MT shank - Takes 27mm bore Cutters (4 spacers, 5mm key, 200mm long)  12MM X 1.75 DRAWBAR BACK
  • 30INT Shank - Takes 22mm bore Cutters 12MM X 1.75 DRAWBAR BACK
    • 30INT Shank - Takes 1" bore Cutters 12MM X 1.75 DRAWBAR BACK
      • 40INT Shank - Takes 22mm bore Cutters 16MM X 2.0 DRAWBAR BACK
        • 40INT Shank - Takes 1" bore Cutters 16MM X 2.0 DRAWBAR BACK
        • R8 Shank - Takes 22mm Cutters 7/16" UNF DRAWBAR BACK
          • R8 Shank - Takes 1" bore Cutters 7/16" UNF DRAWBAR BACK

 

View AllClose
//]]>