null

Workshop visits welcome, by appointment only. Please phone to arrange a visit time.

Drill Press Vices [Precision - Heavy Duty] 60-120mm

SKU:
HDVICE-60
Availability:
If in stock (Please see below price for current stock level) - Ships same day if ordered between Monday-Friday & before 3.30PM Victorian time.
Shipping:
Calculated at Checkout
  • Drill Press Vices [Precision - Heavy Duty] 60-120mm
  • Drill Press Vices [Precision - Heavy Duty] 60-120mm
  • Drill Press Vices [Precision - Heavy Duty] 60-120mm
  • Drill Press Vices [Precision - Heavy Duty] 60-120mm
$79.95

Description

High Precision Heavy Duty Drill Vices - Heavy Duty SG Iron 

Available in 3 different sizes 

- Well designed & sturdy
- High clamping accuracy & hardened jaws
- The V-groove on the clamp is ground & machined to clamp the corresponding round workpiece.
- Parallelism of the guide face to the bottom surface: 0.01/100mm
- The Perpendicular of the jaws to the guideway surface: 0.02mm

HDVICE-60
Jaw Width: 60mm
Opens: 65mm  
Jaw Depth: 25mm

Overall Length: 170mm
Overall Width: 115mm 
 
HDVICE-100
Jaw Width: 100mm
Opens: 140mm  
Jaw Depth: 32mm
Overall Length: 290mm
Overall Width: 180mm 
 
HDVICE-120
Jaw Width: 120mm
Opens: 165mm  
Jaw Depth: 40mm
Max Slot for Bolt: 16.9mm


 
Why is SG Iron so strong?
Cast iron is an alloy of iron, carbon and silicon with carbon levels of about 3.2% and silicon at about 2.2%. If molten cast iron is allowed to cool normally the carbon forms flakes of graphite which run through the iron matrix, hence the term flake graphite iron. These flakes are at the microscopic level, the ends of which form stress points in the cast iron. If cast iron is subject to a compressive load these stress points are not particularly detrimental and flake graphite cast iron is excellent under compressive load. However, tensile loading above the natural tensile strength of the cast iron can cause rapid tensile failure as cracks propagate rapidly out from these stress points.
The result of this is that cast iron has virtually no elongation,
is a brittle material and is therefore limited in its use in tensile
and shock loading applications. For years foundrymen and
metallurgists tried to develop a new type of cast iron that
would withstand bending and shock loading and would have
the characteristics more of malleable cast iron but could be
produced at the lower cost of grey cast iron.

100% GUARANTEED HIGH QUALITY
View AllClose

Related Products

//]]>